How to Hide Home Theater Wires
Whether you’re just setting up your home theater for the first time or using the same system for years, you’ve run into one of the same problems: pesky wires running all over the place. You probably don’t want ugly cables cluttering up your home theater.
Well, with a little ingenuity and some basic tools, you can hide gaming setup, speakers, and projector pesky wires in no time! We’ll show you how to hide home theater wires. So get ready to achieve a clean, professional look in your home theater without sacrificing sound quality.
There are 5 ways to hide those wires, so they’re out of sight and out of mind.
Before you get started, you need some general tools and materials:
- Drill and bit set
- Tape measure or ruler
- Wire cutters/strippers
- Cable ties
- Twist or zip ties
- Staple gun
Ensure all speakers and components are disconnected and positioned where you want them.
1- Use Rugs, Runners, or Carpets to cover it
Hiding wires with rugs, runners, or carpets are a great way to conceal speaker cable in your home. But it cannot hide all inches of exposed wiring.
You can alter the layout of your space at any time by employing this technique. Because some methods make it hard to rearrange the installation of your room
You can shift the cables and rugs without relying on any installations or specialized equipment. This method is simple and can be completed without any tools.
The speakers’ wires are easily visible when hidden under thin layered rugs, runners, or carpets. When families pass through the area, they may damage wire rugs by dragging them on pavement or other surfaces.
For this, you’ll need thick, layered carpets that you place on the floor and then arrange the speaker wire along the edge. This will make the speaker wire almost unnoticeable.
Some people may tie the carpet in the room but remove it in the summer.
Because some people enjoy relaxing on the ground in the summer. In the summer, you’ll need to rearrange your speaker wire if you do. Then you must move on to the other strategies that we have described.
You might be interested in: How to Manage Cables on a Glass Desk
2- Light Strips
Obviously, you have multiple speakers in your room/house. If lights are installed in a gaming area or a home theater, they may provide a lovely sight. It would be best if you tried to use them to your advantage.
Installing light strips is the best way to achieve this goal. The method is to purchase a light strip that is compatible with the area you’re working in.
One of the advantages of this method is that you can use it to improve the visuals in your room. The light will illuminate behind the speaker, making it appear as if it’s floating.
The method is also entirely customizable. You can change the color of the light, the brightness, and even the effects.
If several of the home theater system’s speakers are also intended for placement on the wall or ceiling.
We describe two types of methods. The first is a wire commonly used with speakers, and the second is flat adhesive wire. This technique will make you work harder and take some effort.
First, we’ll discuss flat, adhesively backed tape wire. You may use this wire to easily arrange the speaker wires on the walls. It is thinner than a traditional ID card.
To start, you must take a measurement and then attach it to the wall. One of the benefits of this wire is that you may twist it at any moment. This wire can be bent in any direction with ease.
You won’t need any staples or other equipment for this wire. There will be no scratches on your walls with this wire.
Common speakers wire
To apply this method, you’ll need a staple gun, zip ties, and paint matching your wall. If you want to paint your walls, avoid doing so if the wire’s color is the same as or similar to your wall.
4- Hide speaker wire behind your wall
Our fourth method is costly since you don’t have to make tiny holes in the walls to move the wire across. Underground speaker wires may be hidden behind the wall.
And this will keep your work neat. Plate covers are similar to light and power outlets.
Install speaker wires inside walls are time-consuming and difficult, taking longer than other methods. If you want to do this job, you’ll need an artisan. Because this method is not simple.
5- Cable Raceways or Covers
In our last method, we use cable raceways or covers. We’ll go over two types of cable coverings that enable you to transport speaker wires from the walls to the floors and ceilings.
More than one wire may be used in rubber covers. Thinned rubber covers cover the baseboard and go through the door. You will not have to put in much effort using rubber covers.
The rubber covers are cut it easily with scissors. Use double-sided tape to attach the rubber covers to the wall or floor.
In our second raceways or cover method, we use plastic covers. Plastic covers are an easy and low-cost method of running wires along with the trim. Adhesive materials are used in most cases to connect two pieces together. It consists of adhesives, anchors, joints, and bending joints.
You may use it to connect the pieces together and attach them to the walls and corners. But, the rubber corner is a little easier this way. However, plastic covers should be utilized for corners.
How to hide home theater wires: Conslusion paragraph
Now that you know how to hide home theater wires, your entertainment area can look sleek and professional. With a little preparation and some simple tools, you can set your home theater, or gaming room up just as you want—without any unsightly cords getting in the way.
Also Read: How To Hide Cords On Computer Desks