Top 12 Best Cheap PC Cases Under $50 2021

Cheap PC cases under $50 are good to have if you are trying to save some cash while building a new PC. You can spend the saved amount on some other PC component to increase the performance or have more storage.

As the PC case does not directly affect the performance of your PC, it is acceptable to get a cheap PC case rather than buying an expensive one for the looks or maximum customizability that you don’t need.

However buying a cheap PC case under $50 is not an easy task, as there are a lot of options available in the market. From full tower to mid-tower and micro cases, it can be hard to choose the right one. But don’t worry we got you covered in this guide with 12 best cheap PC cases that you can buy under $50.

You can also check our other articles on PC cases.

Title
Best Selling
Cooler Master MasterBox Q300L Micro-ATX Tower with Magnetic Design Dust Filter,...
Best Gaming
Montech Flyer Black Micro ATX, Mini-ITX/Pre-Installed 2 Fans/High-Airflow/Computer Gaming...
Best Design
DeepCool MATREXX 55 V3 Case, E-ATX Supported, Motherboard or Button Control of Sync of 12V...
Best Mini ITX
Cooler Master Elite 110 RC-110-KKN2 Midnight Black Steel/Plastic Mini-ITX Tower Computer...
Thumbnail
Cooler Master MasterBox Q300L Micro-ATX Tower with Magnetic Design Dust Filter,...
Montech Flyer Black Micro ATX, Mini-ITX/Pre-Installed 2 Fans/High-Airflow/Computer Gaming...
DeepCool MATREXX 55 V3 Case, E-ATX Supported, Motherboard or Button Control of Sync of 12V...
Cooler Master Elite 110 RC-110-KKN2 Midnight Black Steel/Plastic Mini-ITX Tower Computer...
Prime
-
-
Price
$48.99
$50.99
$49.99
$77.30
Best Selling
Title
Cooler Master MasterBox Q300L Micro-ATX Tower with Magnetic Design Dust Filter,...
Thumbnail
Cooler Master MasterBox Q300L Micro-ATX Tower with Magnetic Design Dust Filter,...
Prime
Price
$48.99
Best Gaming
Title
Montech Flyer Black Micro ATX, Mini-ITX/Pre-Installed 2 Fans/High-Airflow/Computer Gaming...
Thumbnail
Montech Flyer Black Micro ATX, Mini-ITX/Pre-Installed 2 Fans/High-Airflow/Computer Gaming...
Prime
-
Price
$50.99
Best Design
Title
DeepCool MATREXX 55 V3 Case, E-ATX Supported, Motherboard or Button Control of Sync of 12V...
Thumbnail
DeepCool MATREXX 55 V3 Case, E-ATX Supported, Motherboard or Button Control of Sync of 12V...
Prime
Price
$49.99
Best Mini ITX
Title
Cooler Master Elite 110 RC-110-KKN2 Midnight Black Steel/Plastic Mini-ITX Tower Computer...
Thumbnail
Cooler Master Elite 110 RC-110-KKN2 Midnight Black Steel/Plastic Mini-ITX Tower Computer...
Prime
-
Price
$77.30

12 PC Cases Under $50

Cooler Master MasterBox Q300L Micro-ATX Tower

Cooler Master MasterBox Q300L Micro-ATX Tower

At the top, we have the cooler master Q300L micro ATX tower with magnetic dust filter. You will find these filters on top bottom and front of the case. The 3D design of magnetic filters look good, but the holes are too small and cause loud fan noise.

Magnetic dust filters are easy to attach and detach from the PC case. Q300L has a transparent edge-to-edge acrylic side panel, which adds to the beauty of this chassis. The side panel is fitted with four screws that are easy to open. The I/O panel on the right side and can be adjusted in six different positions.

It can support a normal-sized ATX motherboard with a body depth and height of only 370mm x 370mm. You can also check out the Cooler Master Q500L variant with a bit more space of 386mm x381mm. There is also an extra 28mm space behind the motherboard to keep the cables hidden.

Key Specifications
TypeMini-Tower
Motherboard SupportMicro-ATX, Mini-ITX
Radiator Support1 x 120 mm / 1 x 240 mm, 1 x 120 mm
GPU Length Supported360 mm
Drive Bays2.5”: Two – 3.5”: One
I/O Ports2 x USB 3.0, Audio I/O
Dimension387 x 230 x 378 mm (15.2 x 9.1 x 14.9 in)
Weight3.7 kg

Thermaltake Versa H17 Black Micro ATX

Thermaltake Versa H17 Black Micro ATX Mini Tower Gaming Computer Case

If you are into a minimalist look, then there isn’t any PC case under $50 that does it better than the Thermaltake Versa H17. It has a clean yet very beautiful compact design that fits with any setup. Versa H17 has a brushed aluminium look with only their logo made on the front bottom left corner. Other than that it has a neat plain look on the left, right and top.

Versa H17 is aimed at budget-conscious buyers, but it doesn’t mean you will get any lesser quality. Building your PC with H17 is surely going to be a fun process. It is a micro chassis that will take micro ATX and mini ITX motherboards.

There are two mesh grills on either side of the front part to intake maximum air. On the top front part, you will find the IO ports including two 2.0 and a 3.0 USB ports, a microphone and headphone port, a reset button, an activity button and a power button. It would have been better if there were two 3.0 USB ports rather than two 2.0.

Key Specifications
TypeMini-Tower
Motherboard SupportMicro ATX
Radiator SupportFront 280mm, Rear 120mm
GPU Length Supported350mm (Without Front Fan)
Drive Bays2.5”: Two – 3.5”: Two
I/O Ports1 USB 3.0, 2 USB 2.0 ports, 1 audio and 1 mic
Dimension5.91″(W) x 3.39″(H) x 6.30″(D)
Weight4.5 kg

Montech Flyer- Black/Micro ATX

Montech Flyer- Black/Micro ATX

Right out of the box, the Montech Flyer gives you a spectacular look. One side of the front has a nice textured look, and the other has a mesh design. In between both, there is an RGB rail, which looks amazing. You can change the RGB settings and select different modes according to your liking.

The right side panel is all see-through acrylic to show off the internal components. The front also has a Montech logo on the lower side.

On top of the case you have a power button, a restart button, LED controller, audio ports, a USB 3.0 and two USB 2.0 ports. The top part also has a large mesh grill with a removable magnetic dust filter and space for two fans. There is a magnetic dust filter at the bottom too with a space of one fan.

This is a micro ATX case, so you can only fit four PCI express slots at the back. There is an all-black fan at the top (included). After removing the front panel, you will find space for two 220mm fans (single front fan included). There is enough room behind the motherboard for the cables to go through and stay hidden. This case is not big but has enough room for a full-sized graphics card and three fans.

Overall this case has a very good looking glossy design with optimal airflow. Multiple places for air intake let the case breathe fine and keep the internal hardware cool.

Key Specifications
TypeMini-Tower
Motherboard SupportMicro ATX
Radiator SupportFront 280mm, Rear 120mm
GPU Length Supported350mm (Without Front Fan)
Drive Bays2.5”: Two – 3.5”: Two
I/O Ports1 USB 3.0, 2 USB 2.0 ports, 1 audio and 1 mic
Dimension5.91″(W) x 3.39″(H) x 6.30″(D)
Weight4.5 kg

AeroCool Cylon RGB Mid Tower

AeroCool Cylon RGB Mid Tower with Acrylic Side Window

If you are looking for a budget gaming PC case, then AeroCool Cylon is a good option. It has a sleek RGB light that goes from the top right to bottom left, adding a cool effect. The unique RGB light gives your gaming setup a modern look with 13 different lighting modes to select from.

The panel on the right side is made of transparent acrylic to showcase the internal hardware of your gaming PC. If we look at the specs, AeroCool Cylon supports liquid cooling with a 240mm radiator in the front panel. You can also add a 120mm fan on the top, three 120mm fans in the front, one 120mm in the rear to maximize the air-cooling function.

It has a dual-chamber design to improve the ventilation and a removable PSU dust filter for easy cleaning. This case supports high-end graphics cards of size up to 371mm. On the top part, you will find a USB 3.0, USB 2.0, power button, audio ports and SD card slot. Overall, it is a nice looking gaming PC case with lots of features and built-in RGB lights.

Key Specifications
TypeMid Tower
Motherboard SupportMini-ITX, MicroATX, and ATX
Radiator SupportFront 240mm
GPU Length SupportedUp to 346mm /371mm (without front fan)
Drive Bays2.5”: Five- 3.5”: Two
I/O PortsUSB 3.0 x 1, USB 2.0 x 2, HD Audio & Mic
DimensionW: 7.80″ H: 18.11″ D: 16.25″
Weight4.4 kg

Thermaltake Versa H21 SPCC ATX Mid Tower Computer Chassis

Thermaltake Versa H21 SPCC ATX Mid Tower Computer Chassis

Thermaltake Versa H22 is one of the best budget PC case in the market. It has a decent looking design, and the front panel has a meshed grill for maximum ventilation. The top part also has a meshed design for ventilation, but you can’t attach a fan as there’s no place for holes.

Looking at the right-side panel, it used to have an acrylic panel on the emerged part, but now it’s all aluminium. It would have been nice to showoff internal PC components. The left and right sides are both the same looking.

Coming at the front, it has a shiny Thermaltake badge (logo). On the top front, you will find a 3.0 USB, a 2.0 USB and audio ports. The power and reset buttons are placed on the top front part of the chassis along with the activity light. You will also find a trio of drive bays at the front with a thin layer of foam at the back to keep it dust-free.

The front panel is easy to remove, and below the drive bays, you will see a removable dust filter at the front of where fans are supposed to be. There is also a dust filter below the PSU, which is rarely seen in the budget PC cases.

Thermaltake Versa series has three models, H21, H22, and H23, with an option to interchange their front panels. At the back, there are two I/O cutouts with rubber grommets for external water-cooling setup.

The drive mounting, in this case, doesn’t require any tools but the flimsy studs aren’t exactly reassuring. They flex in order to insert the plastic notches in place of where you would normally have screws. I’ve seen this done before and it can work WOW but thicker stronger plastic would have been nice.

Key Specifications
TypeMid Tower
Motherboard SupportATX
Radiator SupportRear: 1 x 120mm
GPU Length Supported315mm
Drive Bays3 Accessible 5.25″ + 6 Hidden 2.5″ or 3 Hidden 3.5”
I/O PortsUSB 3.0 x 1, USB 2.0 x 1, HD Audio & Mic
Dimension16.9” x 8.2” x 18.9” (H x W x D)
Weight4.2 kg

DeepCool MATREXX 55 V3 Case

DeepCool MATREXX 55 V3 Case

Without any doubts, Matrexx 55 V3 is a good looking PC case with dual tempered glass, one on the side and one on the front (three quarter with plastic on the right). This is an all-black case that gives a pleasant look when you unbox. Performance-wise this case is fine, but cases with a mesh grill front will give you better results than this.

But if you are in for the looks then don’t worry it won’t cause you any troubles as it has two side facing ventilations. There is a cool looking RGB light that separates the glass and plastic panels. The overall look of this case is very minimalistic. MATREXX 55 V3 has a little bit of everything at an affordable price.

Now let’s talk about what it has on each side. At the back, it has a PSU cutout at the bottom with seven expansion slots and a 120mm fan. On the right side, it has a tempered glass that is attached using four easy to remove screws. The left side is just a metal sheet with two removable screws.

The top part is where the I/O ports are, including power button, reset button, RGB button, audio/mic jack, two 2.0 USB ports and one USB 3.0. There is also a large mesh grill with a dust filter, and underneath that, you can fit two fans. The front can accommodate a radiator up to the size of 360mm.

What I didn’t like is that the cable management is not very neat plus the instructions along with the package are not very user friendly. MATREXX 55 V3 does not come with any built-in fans either. So go for it if you already have additional parts to fit in.

Key Specifications
TypeMini Tower
Motherboard SupportATX
Radiator SupportFront: 120/240/360mm, Top: 120/140/240mm, Rear: 120mm
GPU Length Supported370mm
Drive Bays2.5”: Two- 3.5”: Two
I/O Ports1 x USB 3. 0 + 2 x USB 2. 0 Ports, Audio & Mic, 1 RGB Button
Dimension20.59 x 10.91 x 20.24 inches
Weight8.4 kg

Cooler Master MasterBox MB600L ATX Mid-Tower

Cooler Master MasterBox MB600L ATX Mid-Tower

Cooler Master MB600L has a simple yet elegant brushed metal design. The red-coloured side trims ads to the beauty of the case, and you won’t end up with a boring looking design. Looking at the front of the chassis you can see a single drive bay, and on top of that, you will find a headphone & mic I/O ports, a power button, and two USB 3.0 ports.

The complete right side of MB600L has a smoked acrylic panel. The panel has rubber grommets for the screws to eliminate the unwanted vibration noise. There is plenty of space for a mid-tower case but if you are planning to add a lot of hardware, then go for a full-tower PC case.

The chassis includes a PSU mounting plate that can be removed for the user to install the PSU easily and put it back into the case. The rear 120mm fan is adjustable, and we can move it up or down according to the internal settings of hardware. It can support a GPU up to 400mm and a 240mm radiator.

Key Specifications
TypeMid Tower
Motherboard SupportATX, Micro-ATX, Mini-ITX
Radiator Supportup to 360mm
GPU Length Supported400mm
Drive Bays2.5”: Six or 3.5”: Two
I/O Ports2 x USB 3.0 Audio & Mic
Dimension183.2 x 8.3 x 17.9 inches
Weight5 kg

DEEPCOOL MATREXX 30

DEEPCOOL MATREXX 30

Here we have Deepcool Matrexx 30, a true budget PC case. The design looks good enough with a full side tempered glass panel. The side panel is attached with four standoffs having a rubber lining that will help reduce the vibrations.

The front panel doesn’t restrict the airflow, which is nice to see in a cheap case like this. What I didn’t like is that it lacks a top fan mount and has a pretty irregular placement for front fans.

On the top front part, it has a one USB 3.0 one USB 2.0 port, audio ports a reset and a power button. The front part has a single 5.25″ drive bay.

If you’re installing an SSD on top of the hard drive cage, install it before putting a front fan in. It’s a tight fit between the fan and SSD.

It does not include an instruction manual so have to be creative with this one. Overall it’s a nice cheap PC case that gets the job done with a few minor flaws.

Key Specifications
TypeMini Tower
Motherboard SupportMicro ATX
Radiator SupportRear 120mm
GPU Length Supported250mm
Drive Bays5. 25″ Drive Bays: 1, 3. 5″ Drive Bays: 3, 2. 5″ Drive Bays: 2
I/O PortsUSB 2.0×1, USB 3.0×1, Audio & Mic
Dimension16.38 x 9.45 x 18.31 inches
Weight3.8 kg

Cooler Master N200

Cooler Master N200

Cooler Master has a wide range of PC cases, and that is why we have another Cooler Master PC case on our list. This time it is Cooler Master N200 from the N series. It is quite an old release but still a good option to consider.

At first glance, N200 looks small. The side panels look fairly standard with an emerged centre. On the right-side panel, there are mounting holes for a 120mm side fan. It has an average looking design with a full mesh front panel. The front panel includes two USB 2.0 and one 3.0 along with audio ports, HDD activity light, a reset and a power button.

N200 is a mini-tower but gives you plenty of space and even supports a 240mm radiator in front. It can hold 3.5″ HDDs and up to four 2.5″ SSDs. N200 can also hold high-end graphics cards with length up to 355mm (14 inches) and CPU coolers up to 160mm. It also comes with a dust filter under the power supply for easy cleaning.

On the back, you will find the power supply is mounted at the bottom and above that, there are four expansion slots. At the top, there is space for 120mm cooling fan and two knockouts.

Key Specifications
TypeMini Tower
Motherboard SupportMicro ATX
Radiator SupportFront 240mm
GPU Length Supported355mm
Drive Bays2.5”: Four- 3.5”: Three
I/O PortsUSB 2.0×2, USB 3.0×1, Audio & Mic
Dimension7.9 x 14.9 x 17.5 in
Weight4.3 kg

COUGAR MG130-G Compact Micro-ATX Gaming Case

COUGAR MG130-G Compact Micro-ATX Gaming Case

Smaller and cheaper cases are easily available in the market. But finding the one that looks great as well as provides enough room with premium quality materials can be difficult. For a micro ATX case, Cougar MG130-G has plenty of room for up to six fans or even a 280mm radiator and a stunning design with a full side glass panel.

The overall design is simple yet elegant. The front panel has a textured design and the company’s logo at the bottom. The top front part has a slope to it for easy access to your I/O ports. Here you will find a USB 2.0 header, a USB 3.0 header, audio ports, a reset and a shutdown button.

The top part has a large mesh grill design for maximum airflow and a magnetic dust filter for easy cleaning. The right side has a full-sized tinted glass panel, attached with four screws that are easy to remove.

On the inside, you can install two graphics cards of size up to 330mm and create a powerful gaming setup. The cooling option is great with the ability to house six fans and three radiators, with the front one up to 280mm. With plenty of storage option, it can hold two 3.5″ HDDs and two 2.5″ SSDs or four 2.5″ SSDs at the same time.

Key Specifications
TypeMini Tower
Motherboard SupportMicro ATX
Radiator SupportFront up to 280, Top up to 240mm, Rear 120mm
GPU Length Supportedup to two 330 mm
Drive Bays2.5”: Four or two with Two 3.5”
I/O PortsUSB 2.0×1, USB 3.0×1, Audio & Mic
Dimension8.72 x 15.75 x 16.34 inches
Weight6.1 kg

Cooler Master Elite 110 RC-110-KKN2

Cooler Master Elite 110 RC-110-KKN2 Midnight Black

If you don’t have enough space for a full or mid-tower PC case or looking for a cheap yet compact PC case than Elite 110 is a good option to consider. This is a mini PC case that can hold a lot of power. It is one of the most compact PC cases in the market.

If we look at the design, it’s quite a simple case. Other than the front panel it is made of steel. The front panel is made of plastic covered with a mesh grill for optimal air intake. Both of the sides and the top part are vented for maximum airflow and keep the case cool. Despite its small size, it weighs 2.65 kg.

There is plenty of ventilation available in the case, but it lacks dust filters so that it will accumulate dust inside. You can add a sheet of thin foam behind the vents to keep the dust away.

On the left side of the front panel, you will find two USB 3.0 ports, audio jacks, an activity LED, and a reset button. At the back, there are cutouts for the power supply and the motherboard’s port cluster. The Elite 110 can house a PSU up to 180mm, although the description suggests a standard 142mm.

Overall, this is a good compact PC case at a reasonable price if you are looking to build a mid-range system. It can get a little noisy when running at full, but it can be reduced by selecting quitter components.

Key Specifications
TypeMini Tower
Motherboard SupportMini ITX
Radiator SupportFront: 120/140mm
GPU Length Supported210 mm
Drive Bays2.5”: Four, 3.5”: Three
I/O PortsUSB 3.0 x 2, Audio In & Out
Dimension10.3 x 8.2 x 11.1 inches
Weight2.67 kg

Conclusion

I have included what I thought to be some of the best budget PC cases that you can buy under $50 in this list. All these PC cases are good enough for a tight budget. Now it’s up to you to choose the best for your requirements. I tried my best to make this list as relevant as possible, and I hope you like it.

I love gaming and i have been playing since the Atari and Sega were released. My love for gaming made me build this website where i talk about everything related to gaming.

GPCD